Question 1

How Does Box Forming Work?

Accepted Answer

Case forming can be accomplished with pneumatic vacuum cups to pull a box from the stacked inventory and form the box. The two inner flaps are folded in and the outer flaps meet at the center of the box. Once formed, the flaps on the bottom of the box are automatically secured with tape.

Question 2

What Box Loading Solutions Do We Offer?

Accepted Answer

Jennerjahn Machine also offers two types of automation for Box Loading. These include robotics and push bar.

Question 3

How Does Robotic Box Loading Work?

Accepted Answer

The robot is equipped with special end of arm tooling to lift a finished roll from an accumulation conveyor and load it into a box. Prior to loading, a secondary robot was used to insert plugs into the ends of the core. Utilizing RFID technology, the robot could load different sized rolls into boxes from two independent case formers simultaneously.

Question 4

Can You Load Double Rolls?

Accepted Answer

In this example, two rolls are positioned side by side before being pushed into an open box. The flattened boxes are automatically pulled out of the magazine, and formed into an open case. Next, the case is then transferred to the packing station where the roll stack is pushed in. Once filled, the case is pushed through the tape heads, which seal the top and bottom of the case. Once sealed, the filled cases are ejected onto a gravity box conveyor.

Question 5

How Does Box Closing Work?

Accepted Answer

Once an RSC box has been loaded, it transfers to the case close and seal station. The inner flaps are folded and the outer flaps meet at the center of the box. Once closed, the flaps are secured with tape.

Formado de Cajas Carga y Cierre

All Products

Box Forming, Loading, and Closing